Bunding Solutions by Type
Rubber Floor Bunding
Creates a low-profile containment zone in areas where spills need to be controlled without restricting vehicle or equipment movement.
- Commonly used in warehouses, workshops, and wash bays
- Suitable for areas with regular vehicle or forklift access
- Used to contain oils, fuels, chemicals, and wash water
Portable Bunding
Temporary or relocatable containment for managing spills where fixed bunding is impractical or not permitted.
- Commonly used for temporary worksites, field operations, and maintenance activities
- Suitable for short-term spill containment and mobile equipment
- Can be deployed indoors or outdoors where permanent bunding is not feasible
Bunded Pallets
Integrated secondary containment for the safe storage of drums and IBCs holding oils, chemicals, and hazardous liquids.
- Designed for compliant storage of drums and IBCs containing hazardous liquids
- Integrated sump captures leaks and spills at the container level
- Suitable for warehouses, chemical storage areas, and outdoor use with covers
Flexible Floor Bunding
Drive-over containment barriers for spill control in areas with regular vehicle and forklift traffic.
- Designed for access points, and high-traffic industrial floors
- Collapsible profile allows vehicles and forklifts to pass without removal
- Commonly used where permanent bunding is impractical or disruptive
Temporary Bunding
Fast, short-term spill containment for drums, containers, and emergency response situations.
- Ideal for emergency spill response, maintenance work, and short-term liquid storage
- Lightweight, foldable designs for rapid deployment and easy storage
- Commonly used where permanent or installed bunding is not required
Bunding Options Compared
| Bunding type | Best for | Typical applications | |
|---|---|---|---|
| Rubber Floor Bunding | Fixed containment with frequent vehicle access | Warehouses, wash bays, factories | View Rubber Floor Bunding → |
| Flexible Floor Bunding | Drive-over containment where adaptability is required | Doorways, access points, shared traffic areas | View Flexible Floor Bunding → |
| Portable Bunding | Relocatable containment at temporary or changing sites | Temporary worksites, remote operations | View Portable Bunding → |
| Temporary Bunding | Short-term or emergency spill containment | Spill response, leaking drums | View Temporary Bunding → |
| Bunded Pallets | Static drum and IBC storage | Chemical and fuel storage areas | View Bunded Pallets → |
| Plant Nappy | Localised drip and leak control | Mobile plant and machinery | View Plant Nappy → |
When Is Bunding Required?
Bunding is typically required whenever liquids are stored, handled, or used in a way that could result in spills entering stormwater, soil, or surrounding environments.
In practice, bunding is most commonly used on sites managing oils, fuels, chemicals, wash water, or other controlled liquids where accidental leaks, overflows, or routine wash-down activities may occur.
Bunding is commonly required or expected when:
- Drums, IBCs, or containers holding hazardous or polluting liquids are stored on site
- Vehicle wash bays, maintenance areas, or workshops generate wash water or runoff
- Plant or equipment presents a risk of hydraulic leaks or fuel spills
- Spills could flow into stormwater drains, open ground, or waterways
- Sites operate under council, EPA, or internal environmental management requirements
Requirements can vary depending on factors such as the type of liquid, site layout, drainage connections, and whether containment is temporary or permanent. In many cases, bunding forms part of a broader spill control or environmental management approach rather than acting as a standalone requirement.
If bunding is needed, the most suitable solution will depend on how the area is used, whether vehicles require access, and how long containment is required — from temporary spill response through to permanent containment systems.
Bunding FAQs
Is bunding a legal requirement in Australia?
Bunding requirements vary depending on the type of liquid, site layout, drainage connections, and local regulations. It is commonly required or expected where spills could impact stormwater or the environment.
What types of liquids typically require bunding?
Bunding is commonly used for oils, fuels, chemicals, wash water, and other liquids that could cause environmental harm if spilled or released.
Can vehicles or forklifts drive over bunding?
Some bunding solutions are designed to allow vehicle or forklift access, while others are not. The appropriate option depends on how the area is used and whether traffic access is required.
How do I choose the right bunding solution?
The right solution depends on the liquid being managed, whether containment is temporary or permanent, vehicle access needs, and site conditions. Comparing bunding types or seeking expert advice can help clarify the best option.