Stormwater Screens

Physical debris screening for stormwater pits and trade waste systems

No obligation. We’ll recommend the right system for your site and council requirements.

Trade Enviro is an Australian environmental compliance supplier providing stormwater screens designed for regulated industrial and commercial environments.

Row of custom stormwater screens

Stormwater screens are physical debris exclusion devices installed within pits and drains to capture rubbish, sediment, and coarse solids before they enter downstream stormwater or trade waste systems. They are commonly used as pre-treatment screens to reduce blockages and protect pumps, valves, and filtration equipment.

Trusted by industrial operators across Australia

Snowyhydro
HASLIN Group
SA Water
Port Augusta
McMahon
CEA

Construction and Configuration

Trade Enviro supplies custom-fabricated stormwater screens manufactured from stainless steel and sized to suit existing pits and drains.

Screens are designed to:

  • Retrofit into existing stormwater pits
  • Sit upstream of sensitive equipment
  • Capture debris at the source, as close as possible to the inlet

Each screen is built to suit site-specific pit dimensions and access constraints.

Need Guidance?

Speak with our team for clear, practical advice before making a decision.

  • Unsure which option suits your site conditions
  • Need confirmation before purchasing or installing
  • Want clear, compliance-focused advice

No obligation • Compliance-focused advice tailored to your site

Where Stormwater Screens Are Used

Stormwater screens are commonly used in:

  • Industrial facilities with exposed stormwater pits
  • Trade waste systems requiring pre-screening
  • Sites with pumps, valves, or filters requiring debris protection
  • Locations where manual debris removal is preferred over pump-out

Removing debris from a screen at the pit is typically more practical than removing sediment from downstream holding tanks.

Important Operational Considerations

Important: Stormwater screens are designed to collect debris, not treat pollutants. As screens capture material, flow capacity can be reduced. Regular inspection and manual cleaning is required to maintain performance. Screens function similarly to waste collection devices and should be serviced as part of routine site maintenance.

Custom Options

Stormwater screens can be fabricated to suit:

  • Small or irregular pit dimensions
  • Existing drainage infrastructure
  • Specific access or lifting requirements

Custom sizing ensures compatibility with existing pits while maintaining appropriate flow characteristic

What Our Clients Say

“We are very happy with the service and product provided. Delivery was on time and the backup service couldn’t be faulted. I would most certainly use Trade Enviro again.”

Luke Hillery
Hillery Group

“Fabrication and delivery within a week exceeded expectations. The recommendations on material and length were spot on and the boom is performing exactly as required.”

Environmental Superintendent
Hallis Constructions

“Fantastic service and very quick turnaround. This is the second lot of bunds we’ve purchased and we cannot fault the service or product.”

Ben English
Atlas CEA

“A pleasure to deal with from quote stage right through to delivery. You’re fully informed throughout the process.”

Garry Solly
McMahon Services

“The information provided and delivery time were of an excellent standard. The product has done the job as required and we would not hesitate to recommend it.”

Scott Parsons
Manager – Environmental Health Services

Recent feedback from projects involving wash bays, bunding, spill response and marine containment.